nProvides chassis base with 16 slots on CO site for subscriber nSupports CAT5 to Fiber and Fiber to CAT 5 pair converter nSupports Multi-mode and Single-mode fiber module for different transmission distance requirement such as 20km, 40km, 60km, etc nSupports WDM to enable TX and RX bi-direction full duplex on a single fiber. nSupports full speed non-blocking on each module inter-working with CPE site converter nProvides SNMP agent for NMS management nSupports MIB II, RMON I, Enterprise MIB with SNMPv1/v2c and SNMP Traps nSupports 6 trap/alarm hosts nSupports configurable SNMP Get/Set/Trap community name and port numbers nSupports modules status information for management by Web UI and CLI for the unit power status, module type and port link status of each media converter module nSupports Web UI easy-to-use point and click user interface by photographic quality interface to configure and monitor the device nSupports fully function parameters setting with Command Line Interface (CLI) In-band and out-of-band remote telnet CLI management nLocal console management with VT100 via RS232 port nSupports Management Security Configuration . It can filter connections by IP range, connection type - http, telnet and SNMP and filter action - accept or deny nSupports forget username/password mechanism when user login more than 3 times with incorrect Username and Password. System will prompt the Serial Number display asking for cracked code nSupports hardware, external loopback, fiber remote loopback diagnostics function nSupports connection information for each slot to keep CPE site customer information (Username, Where to, Contact, Phone Number, E-Mail and Description for others) (Keep Data on CO Site by Slot No. and Chassis ID) nSupports Remote Failure indication, Remote Loopback and Link Monitoring IEEE 802.3ah OAM function nSupports hot-swap converter modules nSupports hot-swap and loading-shared redundant power units, each can be DC or AC, Independent power input for each power modules nHot-swappable and upgradeable management CPU module 1.Supports two Ethernet ports for in-band management 2.Supports one RS-232 port for out-of-band management 3.Supports Real-Time Clock (RTC) nSupports three monitored fans for chassis cooling nPower monitor (absent/present, ON/OFF, DC/AC), fans monitor and temperature monitor nSupports chassis temperature detection with selectable F/C degree nSupports configurable device name, location and chassis ID (CID) for device manager easy to find out device location nSupports DHCP client for dynamic IP assignment nSupports Domain Name Service (DNS) nSupports network time sync with NTP and daylight savings nSupports firmware upgrade with TFTP nSupports user management and all events log max. up to 160 entries nSupports logon/logoff notification alarm events nSupports system log file upload to remote server with TFTP selectable nSupports configuration data import/export with TFTP selectable on Web UI/ CLI/ SNMP management nSupports Web UI/CLI auto logout function. User could adjust the auto-logout time interval nSupports both IP-aware and IP-less remote CPE devices managed by chassis management interface nRoHS Compliance
The purpose of Slider Kit is to gather common slideshow-like jQuery functionalities (such as news sliders, photos galleries/sliders, carousels, tabs menus)
When tracking mouse movement, you usually need to know the actual position of the mouse pointer. The event object that is passed to the handler contains some information about the mouse coordinates.